After the two coats are applied, gather all your materials together. 1) Autentico Art Medium 2) brush to be used to apply the Autentico Art Medium 3) Graphic to be applied - I used one from Graphics Fairy. Note that this needs to be printed in mirror image (reversed) and use a laser jet copy. If you don't have a laser yet printer, print with what you have and then have it copied. I usually use the post office near me.
After trimming the paper around the graphic as close as you can, but leaving some room to hold the graphic, apply the Autentico Art Medium to the print, no need to apply to the area of the paper that has no print. Press down to ensure no air bubbles. Leave to rest overnight if possible. I did not speed up the process with the heat tool as the plate is made of a plastic resin - I was not sure if the plate would melt.
With the graphic still very wet, I gently rubbed off the paper, leaving the print behind. You do need to work from the inside out and carefully as you are removing the paper, not the graphic. You may need to repeat this a few times to remove all the paper. Key to success is to ensure the graphic is wet.